Lightly Used Light Weight 94 degree Wade saddle by Keith Valley

SOLD


Lightly used Light weight Wade - 35lbs
94 degree West bars - fits a lower withered, heavier weight horses with thick powerful built shoulders.
16 inch seat with a nice pocket
Cantle board is 4 & 1/2 inch high by 12 & 1/2 inch wide with 1&3/4 inch Cheyenne roll
Horn is 3 &1/2 inch round post with latigo wrap.
4 inch inch monel stirrups.
Has matching 7 foot front latigos on both sides for exact balance
Inskirt rigging with Harwood stainless steel 777 hardware
weighs in at 35 lbs
#1 Hermann Oak Leather, never less.

5 inch front Wade 16 inch seat, Gullet - 7 and 1/2 inch hight by 6 and 1/4 inch width with 4 inch hand hole width, 3 &1/2 inch round post horn, 94 degree north west bars, 7/8ths in-skirt riggin, cantle is 4 & 1/2 inch high by 12 & 1/2 inch wide and crowned with 1 & 3/4inch Cheyenne Roll, Smooth-out half-breed light weight Wade Saddle built by Keith Valley. 5 inch front Wade 16 inch seat, Gullet - 7 and 1/2 inch hight by 6 and 1/4 inch width with 4 inch hand hole width, 3 &1/2 inch round post horn, 94 degree north west bars, 7/8ths in-skirt riggin, cantle is 4 & 1/2 inch high by 12 & 1/2 inch wide and crowned with 1 & 3/4inch Cheyenne Roll, Smooth-out half-breed light weight Wade Saddle built by Keith Valley. 5 inch front Wade 16 inch seat, Gullet - 7 and 1/2 inch hight by 6 and 1/4 inch width with 4 inch hand hole width, 3 &1/2 inch round post horn, 94 degree north west bars, 7/8ths in-skirt riggin, cantle is 4 & 1/2 inch high by 12 & 1/2 inch wide and crowned with 1 & 3/4inch Cheyenne Roll, Smooth-out half-breed light weight Wade Saddle built by Keith Valley.
SOLD

SOLD




Shipping only offered within continental US

For more information...
contact us
let's visit about a custom saddle
made just for you.



Freckles N Me Whiskey Beautiful Buckskin mare raised by Keith Valley Available
Beautiful sweet buckskin mare raised by Keith Valley
Ready for a new loving home!

the link for more information on this mare


Available
94 degree Modified Association saddle by Keith Valley Ready for a job!


Modified Association Saddle - previously loved and has a couple of generations of lovin still in her.
94 degree North West bars - fits a lower withered, heavier weight horses with thick powerful built shoulders.
16" seat
Double D rigging at 7/8ths position
Cantle board is 4 inch high by 12&1/2 inch wide with 1&3/4 inch Cheyenne roll
Horn is 4" high metal dally horn with heavy mule wrap ropping bonnet..
Rawhide wrapped 3" Stirrups.
Has matching 6 and 1/2 foot front latigos on both sides for exact balance
Comes with 30 inch 100 percent natural Mohair front cinch
1/2 Sheridan floral tooled design.
#1 Hermann Oak Leather, never less.

Modified Association Tree - 94 degree bars - #1 choice for fitting powerfull well muscled shoulder horses very well including half drafts - 16 inch seat - cantle is 4 inches high by 12 1/2 inches wide and has a 1 3/4 inch Cheyenne roll - horn is 4 inch high metal dally horn with a heavy mule hide ropping bonnet - Double D rigging set at 7/8ths - previously loved with a couple of generations to love back - half tooled with a classic Sheridan Floral design all hand worked by Keith Valley. Modified Association Tree - 94 degree bars - #1 choice for fitting powerfull well muscled shoulder horses very well including half drafts - 16 inch seat - cantle is 4 inches high by 12 1/2 inches wide and has a 1 3/4 inch Cheyenne roll - horn is 4 inch high metal dally horn with a heavy mule hide ropping bonnet - Double D rigging set at 7/8ths - previously loved with a couple of generations to love back - half tooled with a classic Sheridan Floral design all hand worked by Keith Valley. Modified Association Tree - 94 degree bars - #1 choice for fitting powerfull well muscled shoulder horses very well including half drafts - 16 inch seat - cantle is 4 inches high by 12 1/2 inches wide and has a 1 3/4 inch Cheyenne roll - horn is 4 inch high metal dally horn with a heavy mule hide ropping bonnet - Double D rigging set at 7/8ths - previously loved with a couple of generations to love back - half tooled with a classic Sheridan Floral design all hand worked by Keith Valley.
Modified Association Tree - 94 degree bars - #1 choice for fitting powerfull well muscled shoulder horses very well including half drafts - 16 inch seat - cantle is 4 inches high by 12 1/2 inches wide and has a 1 3/4 inch Cheyenne roll - horn is 4 inch high metal dally horn with a heavy mule hide ropping bonnet - Double D rigging set at 7/8ths - previously loved with a couple of generations to love back - half tooled with a classic Sheridan Floral design all hand worked by Keith Valley. Modified Association Tree - 94 degree bars - #1 choice for fitting powerfull well muscled shoulder horses very well including half drafts - 16 inch seat - cantle is 4 inches high by 12 1/2 inches wide and has a 1 3/4 inch Cheyenne roll - horn is 4 inch high metal dally horn with a heavy mule hide ropping bonnet - Double D rigging set at 7/8ths - previously loved with a couple of generations to love back - half tooled with a classic Sheridan Floral design all hand worked by Keith Valley. Modified Association Tree - 94 degree bars - #1 choice for fitting powerfull well muscled shoulder horses very well including half drafts - 16 inch seat - cantle is 4 inches high by 12 1/2 inches wide and has a 1 3/4 inch Cheyenne roll - horn is 4 inch high metal dally horn with a heavy mule hide ropping bonnet - Double D rigging set at 7/8ths - previously loved with a couple of generations to love back - half tooled with a classic Sheridan Floral design all hand worked by Keith Valley.
Suggested add ons:
a handsome martingale horse choker


$4990

Available




Shipping only offered within continental US

For more information...
contact us
let's visit about a custom saddle
made just for you.



92 degree Wade saddle by Keith Valley
SOLD - gone to work!


92 degree North West bars - fits a good withered, medium weight horse
4 &1/4 inch round tapered post horn with mule hide wrap.
15&1/2 seat with a nice close contact pocket
Cantle board is 12&1/2 wide by 4 inch high
1&3/4 inch Cheyenne roll Stirrup Option: leather lined or natural surface also heal blocks or not.
Also stirrup size option of 4 inch or 5 inch monel stirrups. (4 inch is pictured)
Has matching 6 and 1/2 foot front latigos on both sides for exact balance
Comes with 30 inch 100 percent natural Mohair front cinch
Bucking rolls are optinoal - calf skin or beaver tail
#1 Hermann Oak Leather, never less.

5 inch front Wade 15 & 1/2 inch seat, Gullet - 7 and 1/2 inch by 6 and 1/4 inch by 4 inch, 4&1/4 inch round horn, 92 degree bars, 7/8ths flat palte riggin, cantle 12&1/2 inch by 4 inch high cantle with 1&3/4inch Cheyenne Roll, Smooth-out half-breed Wade Saddle built by Keith Valley. 5 inch front Wade 15 & 1/2 inch seat, Gullet - 7 and 1/2 inch by 6 and 1/4 inch by 4 inch, 4&1/4 inch round horn, 92 degree bars, 7/8ths flat palte riggin, cantle 12&1/2 inch by 4 inch high cantle with 1&3/4inch Cheyenne Roll, Smooth-out half-breed Wade Saddle built by Keith Valley. 5 inch front Wade 15 & 1/2 inch seat, Gullet - 7 and 1/2 inch by 6 and 1/4 inch by 4 inch, 4&1/4 inch round horn, 92 degree bars, 7/8ths flat palte riggin, cantle 12&1/2 inch by 4 inch high cantle with 1&3/4inch Cheyenne Roll, Smooth-out half-breed Wade Saddle built by Keith Valley.
5 inch front Wade 15 & 1/2 inch seat, Gullet - 7 and 1/2 inch by 6 and 1/4 inch by 4 inch, 4&1/4 inch round horn, 92 degree bars, 7/8ths flat palte riggin, cantle 12&1/2 inch by 4 inch high cantle with 1&3/4inch Cheyenne Roll, Smooth-out half-breed Wade Saddle built by Keith Valley. 5 inch front Wade 15 & 1/2 inch seat, Gullet - 7 and 1/2 inch by 6 and 1/4 inch by 4 inch, 4&1/4 inch round horn, 92 degree bars, 7/8ths flat palte riggin, cantle 12&1/2 inch by 4 inch high cantle with 1&3/4inch Cheyenne Roll, Smooth-out half-breed Wade Saddle built by Keith Valley. 5 inch front Wade 15 & 1/2 inch seat, Gullet - 7 and 1/2 inch by 6 and 1/4 inch by 4 inch, 4&1/4 inch round horn, 92 degree bars, 7/8ths flat palte riggin, cantle 12&1/2 inch by 4 inch high cantle with 1&3/4inch Cheyenne Roll, Smooth-out half-breed Wade Saddle built by Keith Valley.
5 inch front Wade 15 & 1/2 inch seat, Gullet - 7 and 1/2 inch by 6 and 1/4 inch by 4 inch, 4&1/4 inch round horn, 92 degree bars, 7/8ths flat palte riggin, cantle 12&1/2 inch by 4 inch high cantle with 1&3/4inch Cheyenne Roll, Smooth-out half-breed Wade Saddle built by Keith Valley. 5 inch front Wade 15 & 1/2 inch seat, Gullet - 7 and 1/2 inch by 6 and 1/4 inch by 4 inch, 4&1/4 inch round horn, 92 degree bars, 7/8ths flat palte riggin, cantle 12&1/2 inch by 4 inch high cantle with 1&3/4inch Cheyenne Roll, Smooth-out half-breed Wade Saddle built by Keith Valley. 5 inch front Wade 15 & 1/2 inch seat, Gullet - 7 and 1/2 inch by 6 and 1/4 inch by 4 inch, 4&1/4 inch round horn, 92 degree bars, 7/8ths flat palte riggin, cantle 12&1/2 inch by 4 inch high cantle with 1&3/4inch Cheyenne Roll, Smooth-out half-breed Wade Saddle built by Keith Valley.
5 inch front Wade 15 & 1/2 inch seat, Gullet - 7 and 1/2 inch by 6 and 1/4 inch by 4 inch, 4&1/4 inch round horn, 92 degree bars, 7/8ths flat palte riggin, cantle 12&1/2 inch by 4 inch high cantle with 1&3/4inch Cheyenne Roll, Smooth-out half-breed Wade Saddle built by Keith Valley. 5 inch front Wade 15 & 1/2 inch seat, Gullet - 7 and 1/2 inch by 6 and 1/4 inch by 4 inch, 4&1/4 inch round horn, 92 degree bars, 7/8ths flat palte riggin, cantle 12&1/2 inch by 4 inch high cantle with 1&3/4inch Cheyenne Roll, Smooth-out half-breed Wade Saddle built by Keith Valley.

Suggested add ons:
a handsome martingale horse choker
bucking rolls (made of either calf skin or beaver tail)
Shipping available for within continental US


SOLD

Also available without front cinch and stirrups if you have your own already.

SOLD


Shipping only offered within continental US

For more information...
contact us
let's visit about a custom saddle
made just for you.



90 degree Wade saddle by Keith Valley gone to work!

90 degree North West bars - fits a good withered, young quarter horse type to medium weight horse
4 &1/4 inch Guate post horn with mule hide wrap.
16&1/2 seat with a nice close contact pocket
Cantle board is 12&1/2 wide by 4 inch high
1&3/4 inch Cheyenne roll Stirrup Option: leather lined or natural surface also heal blocks or not.
Also stirrup size option of 4 inch or 5 inch monel stirrups. (5 inch is pictured)
Has matching 6 and 1/2 foot front latigos on both sides for exact balance
Comes with 30 inch 100 percent natural Mohair front cinch
Bucking rolls are optinoal - calf skin or beaver tail
#1 Hermann Oak Leather, never less.

5 inch front Wade 16 & 1/2 inch seat, Gullet - 7 and 1/2 inch by 6 and 1/4 inch by 4 inch, 4&1/4 inch round horn, 92 degree bars, 7/8ths flat palte riggin, cantle 12&1/2 inch by 4 inch high cantle with 1&3/4inch Cheyenne Roll, Smooth-out half-breed Wade Saddle built by Keith Valley. 5 inch front Wade 16 & 1/2 inch seat, Gullet - 7 and 1/2 inch by 6 and 1/4 inch by 4 inch, 4&1/4 inch round horn, 92 degree bars, 7/8ths flat palte riggin, cantle 12&1/2 inch by 4 inch high cantle with 1&3/4inch Cheyenne Roll, Smooth-out half-breed Wade Saddle built by Keith Valley. 5 inch front Wade 16 & 1/2 inch seat, Gullet - 7 and 1/2 inch by 6 and 1/4 inch by 4 inch, 4&1/4 inch round horn, 92 degree bars, 7/8ths flat palte riggin, cantle 12&1/2 inch by 4 inch high cantle with 1&3/4inch Cheyenne Roll, Smooth-out half-breed Wade Saddle built by Keith Valley.

5 inch front Wade 16 & 1/2 inch seat, Gullet - 7 and 1/2 inch by 6 and 1/4 inch by 4 inch, 4&1/4 inch round horn, 92 degree bars, 7/8ths flat palte riggin, cantle 12&1/2 inch by 4 inch high cantle with 1&3/4inch Cheyenne Roll, Smooth-out half-breed Wade Saddle built by Keith Valley.

Suggested add ons:
a handsome martingale horse choker
bucking rolls (made of either calf skin or beaver tail)
Shipping available for within continental US
SOLD

SOLD

Shipping only offered within continental US

For more information...
contact us
let's visit about a custom saddle
made just for you.



Vaquero Laced 3/4 Floral Wade
by Keith Valley


15 1/2 inch seat
90 degree bars
Stainless Steel hardware
7/8 th's full inskirt rig.
full Vaquero Lace border with 3/4th floral tooling Hand painted background
All origianal art design by Keith Valley.

Vaquero Laced 3/4th Floral Wade by Keith Valley , 15&1/2 inch seat, Gullet - 7 and 1/2 inch by 6 and 1/4 inch by 4 inch, Horn 2&1/2 inch Metal Dally, 90 degree bars, 7/8ths flat palte riggin, Cheyenne Roll, Full Vaquero Lace Border with 3/4 floral tooling with black painted background. Saddle hand built by Keith Valley. Vaquero Laced 3/4th Floral Wade by Keith Valley , 15&1/2 inch seat, Gullet - 7 and 1/2 inch by 6 and 1/4 inch by 4 inch, Horn 2&1/2 inch Metal Dally, 90 degree bars, 7/8ths flat palte riggin, Cheyenne Roll, Full Vaquero Lace Border with 3/4 floral tooling with black painted background. Saddle hand built by Keith Valley. Vaquero Laced 3/4th Floral Wade by Keith Valley , 15&1/2 inch seat, Gullet - 7 and 1/2 inch by 6 and 1/4 inch by 4 inch, Horn 2&1/2 inch Metal Dally, 90 degree bars, 7/8ths flat palte riggin, Cheyenne Roll, Full Vaquero Lace Border with 3/4 floral tooling with black painted background. Saddle hand built by Keith Valley.
Vaquero Laced 3/4th Floral Wade by Keith Valley , 15&1/2 inch seat, Gullet - 7 and 1/2 inch by 6 and 1/4 inch by 4 inch, Horn 2&1/2 inch Metal Dally, 90 degree bars, 7/8ths flat palte riggin, Cheyenne Roll, Full Vaquero Lace Border with 3/4 floral tooling with black painted background. Saddle hand built by Keith Valley. Vaquero Laced 3/4th Floral Wade by Keith Valley , 15&1/2 inch seat, Gullet - 7 and 1/2 inch by 6 and 1/4 inch by 4 inch, Horn 2&1/2 inch Metal Dally, 90 degree bars, 7/8ths flat palte riggin, Cheyenne Roll, Full Vaquero Lace Border with 3/4 floral tooling with black painted background. Saddle hand built by Keith Valley.
Sold

contact us about ordering a saddle like this..

16 inch seat 94 degree bars Modified Association Roper, 4 inch roping metal dally horn, 1/2 Sheridan style floral tooled, 7/8ths Stainless Steel Double D rigging, cantle 4 high by 12 & 1/2 inch wide. Saddle hand built by Keith Valley. SOLD




Shipping only offered within continental US

For more information...
contact us
let's visit about a custom saddle
made just for you.



Ramos Ranch Wade by Keith Valley
Custom Made Wade Saddle
Stainless Steel hardware
All custom specs
All origianal art design by Keith Valley.

Ramos Ranch Wade by Keith Valley  -   All custom specs and all original art design by Keith Valley Ramos Ranch Wade by Keith Valley  -   All custom specs and all original art design by Keith Valley Ramos Ranch Wade by Keith Valley  -   All custom specs and all original art design by Keith Valley

Sold

contact us about ordering a rig like this.

An outfit custom made for the Ramos Ranch - San Antonio Texas SOLD




Shipping only offered within continental US

For more information...
contact us
let's visit about a custom saddle
made just for you.



Visit our Gallery Page to view all the pretty saddles




For more information...
contact us

let's visit about a custom saddle
made just for you.

 


Why order a saddle by Keith Valley?

#1 - Quality never compromised... ALWAYS made with the best qulity supplies available
#2 - Made by Keith Valley himself, not subcontracted out like some others.
#3 - Secure seat with unequal comfort
#4 - Fits horses right
#5 - High value retention
#6 - High demand (search for a Keith Valley Saddle for sale).
#7 - #1 Hermann Oak Leather, never less.

5 inch front Wade 15 & 1/2 inch seat, Gullet - 7 and 1/2 inch by 6 and 1/4 inch by 4 inch, Horn  4&1/2 by 4 & 1/4 inch Guatelejara, 90 degree bars, 7/8ths flat palte riggin, Cheyenne Roll, Smooth-out half-breed Wade Saddle built by Keith Valley sporting the S bar S ranch brand. 5 inch front Wade 15 & 1/2 inch seat, Gullet - 7 and 1/2 inch by 6 and 1/4 inch by 4 inch, Horn  4&1/2 by 4 & 1/4 inch Guatelejara, 90 degree bars, 7/8ths flat palte riggin, Cheyenne Roll, Smooth-out half-breed Wade Saddle built by Keith Valley sporting the S bar S ranch brand.
5 inch front Wade 15 & 1/2 inch seat, Gullet - 7 and 1/2 inch by 6 and 1/4 inch by 4 inch, Horn  4&1/2 by 4 & 1/4 inch Guatelejara, 90 degree bars, 7/8ths flat palte riggin, Cheyenne Roll, Smooth-out half-breed Wade Saddle built by Keith Valley sporting the S bar S ranch brand.

For more information, contact us about a saddle made just for you.



For more information...
contact us

let's visit about a custom saddle
made just for you.

 

 

 

 

 

Placing a custom saddle Order:

A deposit is required to start saddle work order and orders are serviced first come first served.

Feel free to call us or email us about saddle fitting, our phone number is 307 690-1088

The floral carving is priced according the time it takes to produce.

Valley designs each of his floral tooling patterns free hand making each design unique. Also hand painting the background around the flower pattern gives a striking eye appeal, it takes longer, but well worth the time and patience invested.

Visit our video page for info video clips explaining how both of these steps are performed.

Deposits are not refundable, contact Keith Valley for more details.

>